Yahoo Suche Web Suche

Suchergebnisse

  1. Suchergebnisse:
  1. Vor 20 Stunden · Die hätten dann also zusammen 3.7V, 20000mAh, 0,185ohm und 74Watt. Ich brauche für den Coil einen Leistungs Bereich bis maximal 55W (Nur bis 55 um den Akku zu schonen). Ich würde gerne mit dem Poti ca. 0-55W einstellen können. Ich habe bei anderen Hobbybastlern gesehen, dass sie einen 500ohm 0.5watt Drehpoti eingebaut haben.

  2. Vor 20 Stunden · Hi, One is a total noob with electronics :-(. Building a project, using a DIY coil i made, Its to project a magnetic source few inches or feet off a built stand, 2 mm thickness at electro magnetic point. Using 2 x9v batteries in parallel, the source moves slightly, then bought a 10v - 60v dc to...

  3. Vor 20 Stunden · Learn about patterns found in Maori art as you use chalk pastels to make a koru (spiral/coil) design.

  4. Vor 20 Stunden · The 2 coil stator plates with an internal ignition coil have a 6V-15W lighting coil. The statorplate is exact like the original and should be used only for original restorations. No interference suppressed sparks, spark plug resitor caps and cables are allowed.

  5. Vor 20 Stunden · It is sandwiched between the coil and cap and goes to the center of the three-wire connector. It is a common mistake to forget it. If it is missing, the coil will run in reverse polarity and will burn up in ~100 miles. I haven't dealt with an HEI cap for many years, but am 98% sure the rubber washer goes in the cap first, then the carbon button ...

  6. Vor 20 Stunden · Mitch Evans and Antonio Felix da Costa are the winners of the two Formula E races in Shanghai. Evans won the first race on Saturday in a Jaguar, while Porsche works driver Antonio Felix da Costa was victorious on Sunday. In total, five out of six podium places in China went to race cars with an electric drive from Jaguar or Porsche.

  7. Vor 20 Stunden · I just want to be sure I'm using the right parameters in the screen below, especially those in red, and the dwell parameters.