Yahoo Suche Web Suche

Suchergebnisse

1. Suchergebnisse:

1. link.springer.com › article › 10Experimental study on the boiling criterion of the fuel film...

   link.springer.com › article › 10

   • Im Cache

   11. Nov. 2019 · Abstract The vaporization of the fuel film after spray/wall impingement dramatically affects the combustion and emission behaviors in engines. In this study, the formation and vaporization characteristics of the fuel film were investigated by injecting diesel fuel from a single-hole injector onto a high-temperature, rough wall. The film thickness was measured using the refractive index ...

2. www.jstor.org › stable › 44736319Modeling Fuel Film Formation and Wall Interaction in Diesel...

   www.jstor.org › stable › 44736319

   AA fuel film model has been developed and achieve desirable air-fuel mixing and combustion, the implemented into the KIVA-II code to help account for fuels are sprayed in either the carburetor, port, pre- fuel distribution during combustion in diesel engines. chamber, or directly in cylinder. In all these designs, the.

3. tuprints.ulb.tu-darmstadt.de › 16623Effect of engine conditions and injection timing on piston-top ...

   tuprints.ulb.tu-darmstadt.de › 16623

   • Im Cache

   5. Dez. 2023 · Effect of engine conditions and injection timing on piston-top fuel films for stratified direct-injection spark-ignition operation using E30.

4. www.fuelhq.ie › workIgniting Imagination Through Our Work | FUEL

   www.fuelhq.ie › work

   • Im Cache

   Check out FUEL's previous work and discover how we created entertaining, engaging, immersive and inspiring projects with the world’s greatest organisations and brands.

5. link.springer.com › chapter › 10Visualization of Fuel Wall Wetting, Oil Dilution by Fuel, and Oil...

   link.springer.com › chapter › 10

   • Im Cache

   22. Nov. 2017 · Piston fuel films may cause pool fires and generate soot [ 1, 2 ]. Also, fuel impingement on the cylinder wall causes fuel-oil interactions, and a modification of the tribologic properties of the lubricant, such as wear resistance and viscosity [ 3 ].

6. link.springer.com › chapter › 10Burners for Liquid Fuels - Springer

   link.springer.com › chapter › 10

   • Im Cache

   19. Sept. 2021 · Typically, liquid fuels such as kerosene, alcohol and vegetable oils are used in wick burners. The working principle involved in a wick burner is quite similar to that of a candle. A thin fuel film is formed on the surface of the wick that is saturated with the fuel and is heated by the flame initiated at the tip of the wick.

7. www.sae.org › publications › technical-papersMeasurement of Liquid Fuel Film Attached to the Wall in a Port...

   www.sae.org › publications › technical-papers

   • Im Cache

   24. Okt. 2023 · Liquid fuel attached to the wall surface of the intake port, the piston and the combustion chamber is one of the main causes of the unburned hydrocarbon emissions from a port fueled SI engine, especially during transient operations. To investigate the liquid fuel film formation process and fuel film